First Degree Fitness E950, Руководство пользователя

Страница: 14 / 28

14
Operation Instructions
Chain Tensioning Bolts: Allows for tightening the Chain or adjustment from side to
side. Make sure when tightening only to adjust the same amount for both Bolts,
otherwise the sprocket will be misaligned.
Note: Tightening the right Bolt only (turning clockwise) will pull the right side of the
Crank assembly toward you, tightening the left will pull the left side toward you.
Use this feature to realign the rear with the front sprocket if needed or when
changing to a new Chain.
E950 Control Arm
Handgrip: Loosen Knob to adjust
Handle position from 0-90 degrees.
Crank Arm Bolts: Loosen all 8
Bolts slightly before adjusting/
tightening Chain.
Inspection plate: Open to check
chain tension.
With a Screwdriver or other
implement, check tension just
behind front sprocket.
Note: A properly adjusted chain
will have 3mm-5mm of slack only.
See top of page for adjustment
details
.
Warning: Do not check
Chain tension by fingers!
Adjustment Knob: Loosen to
allow the control arm to travel
through 90 degrees of travel.
Note the Telescoping Tube is
gas assisted.
Tighten securely when desired
workout position is reached.
E950 Slider Arms: Refer
to following assembly page.