First Degree Fitness E-520 Fluid Rower, Руководство пользователя

Страница: 21 / 25

21
Fault Probable Cause Solution
Water changes
color or becomes
cloudy. Rower is in direct sun-
light or has not had wa-
ter treatment. Change rower location to reduce direct
exposure to sunlight. Add water treatment
or change tank water as directed in the
water treatment section of this manual.
Consider using distilled water to refill
tank.
Rowing stroke re-
turn is too light. Bungee not under
enough tension.
Rowing Belt missing
one wrap around rower
belt pulley.
Bungee has slipped off
the Bungee Pulley
Wheel.
Cut Bungee Tie Rack and tighten slightly
on Bungee Hook.
Computer screen
illuminates, but
does not register
when rowing. Loose or failed connec-
tion/Sensor gap too
wide (see erratic com-
puter display). Check that the computer lead is connect-
ed properly. If connected properly check
sensor gap. Contact your local service
center if this fails to address the problem.
Rowing Belt can-
not extend to the
end of rowing
stroke or no re-
sistance.
Rowing Belt needs to be
unwrapped 1 turn or,
requires an extra wrap
on the Rower Belt Pul-
ley
The FLUID ROW-
ER computer
does not illumi-
nate after battery
installation. Batteries installed incor-
rectly or need replacing. Reinstall batteries in correct position and
try again. If the LCD screen fails to illumi-
nate, try rotating the batteries slightly in
the computer. If this fails, contact your
local service center.
The FLUID ROW-
ER computer dis-
play is erratic
while displaying
SPM and
500meter times. Gap between sensor
and magnetic ring is too
wide.
Remove large service cover and check gap
between sensor and magnetic ring (should
be no more than 2.5mm).
Troubleshooting