First Degree Fitness E-216 Fluid Rower, Руководство пользователя

Страница: 17 / 21

17
Replacing the E-216 Bungee Shock Cord
Step 6 . Once the Bungee Cord is in
position, make two wraps on the
Rope/Bungee Pulley in a clockwise
direction, making sure the Bungee
Cord tracks in the proper grooves.
Make sure the Bungee is wrapped
behind the Dyneema Cable. Once
the Bungee has reached the position
shown below, you may begin to re-
wrap the Bungee around the Bungee
Pulleys, starting with the upper-right
rear Pulley.
Re-Wrapping
Remove
Replace
Step 5 . After removing the magnetic ring, the Bungee Cord will be accessible. Pull through
the Rope/Bungee Pulley and remove. Note that the rower handle should be resting on top of
the tank (as shown in step 2) for the bungee hole to line up. Thread new Bungee Cord
through and pull until knotted end is held securely in the slot.