FCC requirements
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the base unit of this equipment is a label that contains, among other information,
the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment.
If requested, this information must be given to the telephone company.
The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response to
an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as determined by the total
RENs, contact the local telephone company. For products approved after July 23, 2001, the
REN for this product is part of the product identifier that has the format US: N7KMM09BT110P.
The digits represented by 09B are the REN without a decimal point (For example, 03 is a REN
of 0.3). For earlier products, the REN is separately shown on the label. If your equipment
causes harm to the telephone network, the telephone company may discontinue your service.
If you experience trouble with this telephone equipment, please contact the following address
and phone number for information on obtaining service or repairs. The telephone company
may ask that you disconnect this equipment from the network until the problem has been
corrected or until you are sure that the equipment is not malfunctioning. This equipment may
not be used on coin service provided by the telephone company. Connection to party lines is
subject to state tariffs.
First Data hardware services
1169 Canton Road, Marietta, GA 30066 (800) 827-8297 A plug and jack used to connect this
equipment to the premises wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
Notice:
The Ringer Equivalence Number (REN) for this terminal equipment is 09B. The REN
assigned to each terminal equipment provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The termination on an interface
may consist of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed five.
AVIS:
L’indice d’équivalence de la sonnerie (IES) du présent matériel est de 09B. L’IES
assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent
êtreraccordés à une interface téléphonique. La terminaison d’une interface peut consister
en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices
d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.
FCC statement
This Equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
© 2009–2019 Fiserv, Inc. or its affiliates. Fiserv is a registered trademark.
Other products referenced in this material may be trademarks or
registered trademarks of their respective companies. 603578 2019-10
