3
First Data FD150 terminal
Let’s get started
Typical set-up time: 10 –15 minutes
Where to put the FD150 Terminal
Place the terminal on a desk or tabletop. Avoid areas with
direct sunlight, objects that radiate heat, excessive dust and
other electrical devices that can cause excessive voltage.
Loading the paper
Pop the printer cover’s latch to open the cover; then lift the
cover. Load a roll of paper (Appleton POS Grade Plus 600-2.4
is recommended) into the printer. The thermal print-side of the
paper will feed out facing the operator. Close the cover and
tear off any excess paper.
