IS 582 ECN 3851
Page 11 of 17
Gently pull out the bracket from appliance enough to be able to unplug the igniter
lead ends from the igniters and secure them temporarily whilst replacing the igniters
Reconnect igniter leads
Replace bracket
Check operation is restored
Burners,
Remove lower and upper control panel facia.
Remove burner pipework
Unscrew burner
Remove
Replace.
Flame controller
Remove lower facia panel.
Remove flame controller screws.
Remove flame controller.
Unplug cable multi-connector.
Replace flame controller.
Gas valve
Remove lower facia panel.
Remove flame controller screws.
Replace flame controller.
Control thermostat
Remove control knobs and facia panel.
Unscrew the fixing screws and disconnect the wiring.
Remove the thermostat from the switch.
Remove rear thermostat bulb cover plate
Remove the thermostat bulb from the bracket.
Safety thermostat
Remove facia panel.
Unscrew the fixing screws and disconnect the wiring.
Remove rear thermostat bulb cover plate
Remove the thermostat bulb from the bracket. Replace.
Energy regulator (Simmer circuit)
Remove facia panel.
Unscrew the fixing screws and disconnect the wiring.
Remove energy regulator.
NB: The bracket is designed to preset the simmer
setting
; under no circumstances should the energy regulator be set to any other
position other those allowed by the bracket preset position.
