31
4).Always steer the scooter with both hands on the handlebars.
5).Always keep your feet within the foot area while driving the
scooter.
6).Check before you switch on the scooter:
8.2 LED DISPLAY PANEL
LED panel “On”:
The scooter is switched on and ready for driving.
If the status indicator is blinking:
There may be a faulty situation.
Please switch off the
scooter and contact
your approved service
provider.
Status
indicator
8.1POWERING ON/OFF
The switch is located near the right side of the dashboard. Insert
the key into the switch and turn it to the right to power on the
scooter. Turn it to the left to power off the scooter.
8.3
ADJUSTING THE SPEED
Use the speed adjustment dial
to adjust the speed to suit your
driving conditions. Always use
lower speeds if you are
uncertain about the driving
conditions.
Ensure your scooter is in
drive mode (not in “freewheel”
mode)
Check the “freewheel” mode
lever is in the pushed down
position
Seat is locked into the desirable
position
Move the seat forwards and
backwards to ensure it is
stationary.
Are the batteries charged?
Check the battery indicator to
verify the charging status of the
batteries
Are the brakes working?
Check by driving slowly and
stopping again
Are the tires and wheels
undamaged and is the air
pressure correct?
Visual check of tires and wheels
