= Driving Mode (B):(Motor is engaged.)
1.Always switch the scooter off to push it.
2.Do not push the scooter too fast. If a pre-set
speed is exceeded while you are pushing the scooter, the drive motor
will switch on automatically and brake the scooter.
After any adjustments, repair or service and before use, make sure all
hardware is tightened securely - otherwise injury or damage may
result.
7.
ADJUSTING THE SCOOTER
The following describes how to set up and adjust your Scooter in
order to have a comfortable and safe drive.
7.1
ADJUSTING SEAT POSITION
1.
Pull the seat
locking lever
(1) upwards
and move the
seat forwards
or backwards
to the desired
position or
distance.
2.
Let go of the
locking lever
and engage
the locking
mechanism
by pushing the
seat slightly forwards and/or
backwards.
Accident hazard due to an improperly locked seat:
Ensure that the seat is properly locked after adjustment; if the seat is
properly locked, it will not move when you try pushing the seat
slightly forwards and backwards.
