Important Safeguards
When using electrical appliances, basic safety precautions
should always be followed, including the following:
DANGER!
The Manufacturer does not represent this unit to be water-
proof. To reduce the risk of fire, electrical shock, or damage
to the unit, do not expose this unit to rain or moisture.
DANGER!
This product has the capability to operate with an optional 9V
rechargeable nickel cadmium backup battery, which must be
recycled at the end of the life of the battery and must be dis-
posed of properly. Do not incinerate or compost batteries, as
they will explode at high temperatures. Contact your local
authority for information concerning reclamation and disposal
of rechargeable nickel-cadmium batteries.
Cadmium is a
chemical known to the State of California to cause cancer.
DANGER!
This product has a built in circuit for charging an optional 9V
rechargeable nickel cadmium backup battery. When a regular
9V alkaline battery is used as a backup power source, turn the
battery selection switch on the back of the unit to “Non-
rechargeable” (NB) position to switch off the internal charger.
CHARGING BATTERIES INCORRECTLY CAN CAUSE FIRE AND
EXPLOSION AND ENDANGER LIVES.
DANGER!
To reduce the risk of electric shock, do not disassemble this
product. Take it to qualified service personal when service of
repair work is required. Opening or removing cover may
expose you to dangerous voltages or other risks. This unit is
fully transistorized and does not contain any parts that can be
repaired by the user.
This product is designed to operate using the AC adapter (120V) sup-
plied in a household application.
- Do not allow anything to rest on the power cord. Do not locate
this product where persons walking on it could damage the
cord. Keep cord away from heated surfaces.
- The output terminal blocks for Remote Alert provides a floating
relay contact output to external warning devices. The contact
will close when an alert broadcast is being received. Do not
exceed the maximum current rating of the contacts (0.5A
@125VAC or 1A @ 30VDC). Consult a licensed electrician if you
want to connect other devices to the radio.
- To disconnect, grip the AC adapter and pull it from the wall out-
let. Never yank the cord.
- Wipe unit with a damp cloth occasionally to keep it looking new. Do
not use harsh chemicals, cleaning solvents or strong detergents.
- When an external antenna is used, make sure that there are suffi-
cient lightning protection on the antenna and its cable feed. Make
sure all the ground connections are sound and fit. Do not get close
to the unit when it is operating under a thunderstorm. Contact your
external antenna supplier for more information on lightning protec-
tion and grounding issues on your antenna. You could also get
information from lightning protection device suppliers.
1
WX-67 Large Manual 3/12/02 10:25 AM Page 3
