Note
:
Make sure the hour is set so that the
AM
or
PM
indicators are
displayed correctly.
SETTING THE DATE
6.
Press the button after the hour is set, Minute digits flashing to prompt
for input.
7.
Tap the button to set the minute digit(s). Press and hold the buttons to
speed up the forward or reverse scanning of the digits.
8.
Press the button to confirm. Month digits flashing to prompt for input.
9.
Tap the buttons to set the month. Press the button after the month is
set, Date digits flashing to prompt for input.
10. Tap the button to set the date. Press and hold the buttons to speed up
the forward or reverse scanning of the digits.
11. Press the button after the date is set, Year digits flashing to prompt for
input.
12. Tap the button to set the year. Press the
SELECT
button to finish the
setting mode back to main menu.
13. Tap the
MENU
button to exit the set up mode.
Note:
If the unit was reset or the batteries go dead, you need to set the
clock again.
ALARM SETTING
SETTING THE ALARM TIME
1. In standby mode, tap the
MENU
button once, and
“COUNTY CODE”
is
shown on the display.
2. Tap the button until
“ALARM SET”
is showing on the display.
3. Tap the
SELECT
button to enter alarm setting mode, the default alarm time
AM 12:00 is displayed and hour digits is flashing to prompt for input.
4. Tap the button repeatedly to set the hour value. Press and hold the
buttons to speed up the forward or reverse scanning of the digits.
Note:
Make sure the hour is set so that the
AM
or
PM
indicators are
displayed correctly.
5. Press the button after the hour is set, Minute digits flashing to prompt
for input.
6. Tap the button to set the minute digit(s). Press and hold the buttons to
speed up the forward or reverse scanning of the digits.
7. Press the button after the minute is set, alarm wake up source flashing
to prompt for input.
8. Tap the button to select beeping alarm, wake to radio or turn off the
alarm.
11
