6
1
LCD DISPLAY
14
WARNING ALERT INDICATOR
2
POWER ON/STANDBY
/
MODE BUTTON
15
BUILT IN FM/WEATHER BAND
ANTENNA
3
MENU /PRESET BUTTON
16
BELT CLIP/FLIP OUT STAND
4
MOVE LEFT
/ TUNE- BUTTON
17
BATTERY DOOR
5
SELECT / MESSAGE BUTTON
18
LOW BATTERY INDICATOR
6
SPEAKER
19
ALERT INDICATOR
7
MOVE RIGHT
/ TUNE+
BUTTON
20
WEATHER RADIO MODE
INDICATOR
8
DC-IN JACK
21
FM RADIO MODE INDICATOR
9
MOVE DOWN
/ VOLUME
DOWN (-) BUTTON
22
AM RADIO MODE INDICATOR
10
MOVE UP
/ VOLUME UP (+)
BUTTON
23
PM TIME INDICATOR
11
BACKLIGHT BUTTON
24
TONE ALERT INDICATOR
12
ADVISORY ALERT INDICATOR
25
VOICE ALERT INDICATOR
13
WATCH ALERT INDICATOR
POWER SOURCE
This unit operates using an AC-DC Adaptor (not included) or on 3 X AA batteries (not
included).
If the low battery icon
appears on the display, install or replace fresh “AA” batteries.
AC POWER OPERATION
An AC-DC Adaptor with the output 4.5V DC 300mA (not included) is required for operating
the main unit in AC power mode.
1.) To connect the AC-DC Adaptor to the unit, firmly and securely insert
the DC plug of the adaptor into the DC Jack located on the left hand
side of the back of the unit.
2.) Plug the AC-DC Adaptor plug into a household AC outlet that supplies
120V AC ~ 60Hz. Connecting this system to any other power source
may cause damage to the system.
NOTE
: When an AC-DC adaptor is connected to the DC Jack, the batteries are automatically
disconnected. Be sure to use an AC-DC adaptor with an output rating of 4.5V DC, 300
mA, and with the following polarity (center positive):
If you are using a universal adaptor with an output polarity switch or polarized plugs, be sure
to set the polarity of the center plug to positive "+".
