Page 5
Installing camera
Step 1:
Select the position for the camera and drill holes for the mounting bracket and for non
functioning cables. (Screws and anchors are supplied. Use an appropriate screw type for the mounting
surface.) Mount bracket to surface. Feed decoy cables through mounting surface.
Step 2:
Install batteries according to “+ /- polarity marker”. Insert the two AA batteries into the battery
compartment.
Step 3:
Attach camera body to bracket. Loosely tighten Ring and Thumb Screw.
Step 4:
Aim decoy camera at target and position. Tighten Ring and Thumb Screw.
Battery Replacement - Instructions for Use
Always purchase the correct size and grade of battery most suitable for in-
tended use. Replace all batteries of a set at the same time. Clean the battery
contacts and also those of the device prior to battery installation. Ensure
the batteries are installed correctly with regard to polarity (+ and -). Remove
batteries from equipment that is not to be used for an extended period of
time. Remove used batteries promptly.
Attach Stand to Mounting Surface
and Adjust Bracket Angle
product overview
Installation
Drill holes for anchors and cables.
Install bracket assembly
Install Bracket
Completed Installation
