First Alert NVR1640, Руководство пользователя

Страница: 66 / 104

Page 66
Configuring Email
NETWORK SETTING
Before you configure email settings
The NVR must be connected to a local area
network (LAN) that maintains an SMTP mail server.
It must also be connected to either an intranet or
the Internet — depending on the location of the
email accounts to which the emails will be sent.
Email notifications can be sent to all designated users
when an alarm event is detected, when a motion event is
detected, or when the administrator password is changed.
To configure emails, enter the Network Settings interface:
Menu > Configuration > Network.
1. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway,
and the Preferred DNS server.
2. Click Apply.
3. Click on Email.
4. Configure the settings according to the diagram/list below.
5. Click Apply.
Enable Server Authentication: Optional.
User name: user account of sender’s Email for
SMTP server authentification.
Password: password of sender’s Email for
SMTP server authentification.
SMTP Server IP address or host name
SMTP Port No: The default TCP/IP port used
is 25.
Enable SSL: Optional.
Sender: Name of sender.
Sender’s Address: Email address of sender.
Receiver: Name of user to be notified.
Receiver’s Address: Email addres of notified
user. Up to 3 can be configured.
Enable Attached Pictures: Enabling allows
alarm images to be attached to emails.
Interval: Time (in seconds) between two
actions of sending attached pictures.
6. Clicking Test will display one of the following messages.