Page 50
Page 51
t
echnIcal
s
pecIfIcatIons
I
tem
d
evIce
p
arameter
s
pecIfIcatIon
s
ystem
Language
English/ Chinese
GUI
16 Bit Graphic menu (OSD Menu)
Password
User password, Administrator password
v
Ideo
Video in
4 ch composite video input 1.0Vp-p, impedance 75Ω, BNC
Video out
1 ch composite video output, BNC
Video display
4-channel: 1/4 channel switch
Video standard
PAL, 25 f/s, CCIR 625line, 50 scene
NTSC, 30 f/s, CCIR 525 line, 60 scene
a
udIo
Audio input
2-ch audio input, impedance 600Ω, RCA
Audio output
1-ch audio output, impedance 600Ω, RCA
Record style
Audio video recorded simultaneously
Audio compression
ADPCM
p
Icture
p
rocessIng
and
s
torage
Picture compression
H.264
Picture resolution
CIF/HD1/D1
Audio style
ADPCM
Video code rate
CIF: 384~768 Kbps
HD1: 512~1024 Kbps
D1: 512~1024 Kbps
Audio code rate
32 KB/s
Data storage
One 500GB SATA HDD included, up to 2 TB capable
a
larm
Alarm input
4 alarm inputs
Alarm output
1 alarm output
c
onnectIons
PTZ interface
Supports PELCO-D, PELCO-P
Mouse
Mouse USB 1.1
Data
USB 2.0
Network interface
RJ45, 10M/100M
vga
VGA output
None
s
oftWare
u
pgrade
USB
Supports USB firmware upgrade
o
ther
Voltage input
AC:110~240V, DC 12V
Power Consumption
8.7W without HDD
Working temperature
14 °F to 122 °F (-10 °C to 50°C)
Video impedance input
75Ω each channel
Video output
1Vp-p CVBS signal
a
ppendIx
hard drive
a
ppendIx
specifications
h
ard
d
rIve
r
emoval
and
I
nstallatIon
HDD Installation
To install or replace the hard drive in the DVR
:
1. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS FROM
THE DVR BEFORE REMOVING COVER. FAILURE TO DO SO CAN
RESULT IN DAMAGE TO THE DVR OR ITS COMPONENTS AS
WELL AS INJURY OR DEATH
2. Remove screws securing the cover of the DVR and remove cover
3. Disconnect the hard drive power and data cables
4. Remove the screws securing the hard drive rails to the chassis.
(See image at right)
5. Remove screws securing hard drive rails to hard drive
6. Remove old hard drive and replace with the new one.
7. Re-install the screws securing the hard drive to the rails and rails
to the chassis.
8. Re-connect the hard drive power and data cables.
9. Replace the cover and screws. Note: Format hard drive per
instructions in HDD MANAGEMENT section.
Caution!
When working with electrostatic sensitive
devices such as hard disk or DVR
unit, make sure you use a static-free
workstation. Any electrostatic energy
coming in contact with the hard disk or DVR can damage
it permanently.
Hard Drive Format
NOTE: A new hard drive must be formatted
after installation. Format per instructions
in the HDD MANAGEMENT section of this
manual.
Hard Drive - Remove/Connect Cables
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
UNPLUG ALL POWER SOURCES, INCLUDING CAMERAS FROM
THE DVR BEFORE REMOVING COVER. FAILURE TO DO SO CAN
RESULT IN DAMAGE TO THE DVR OR ITS COMPONENTS AS
WELL AS INJURY OR DEATH.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
CAUTION!
RISK OF ELECTRIC SHOCK
Remove Screws Securing Rails to Chassis
Remove four screws
Hard Drive - Remove/Install Rails
