background image

Page  11

PRODUCT OVERVIEW

MOUSE AND VIRTUAL KEYPAD

Mouse Operation with this DVR

T

he mouse is the primary input device 

for navigating system menus.
NOTE: Unless otherwise noted, all system functions described 
in this manual are achieved through mouse input.

To use a mouse with the system:
Connect a USB mouse to the USB MOUSE 
port on front panel of the system,
NOTE: Only the USB 2.0 port on the 
front panel is designed for data backup 
to a USB flash drive. Do not connect 
a USB flash drive to the USB MOUSE port.
 
Use the mouse buttons to perform the following:

1

 

Left-Button:

 

•  Click to select a menu option
•  During live viewing in split-screen double-click on a 

channel to view the selected channel in full-screen 

•  Double-click the channel again to 

return to split-screen view

•  Selecting letter or number on the virtual keypad

2

 

Right-Button

•  Click to open the Quick Access Menu
•  Exits any window
•  Exits any menu or re-opens previous menu 

3

 

Scroll-Wheel:

 

•  Forward-switch to VGA; backward-switch to BNC (CVBS)

Mouse Controls

DVR Front Face

Connect Mouse & 

USB Drive

2

Mouse Button Operation

3

Virtual Keypad

Virtual Keypad

To enter text or numerical data, the system uses a virtual 
keypad. In fields where letters or numbers can be entered, 
you can switch between various formats – numbers, upper 
case (ABC) and lower case (abc). Note you can access all 
numbers when in the “Letters” virtual keypads. See below.

Numbers

Letters-Uppercase

Letters-Lowercase

1

Содержание DC4205-420

















































Отзывы: