1
Locate the four (4) Concrete Bolts inside the safe.
2
Remove interior shelving and four (4) Bolt Down Hole Caps.
3
Place the safe where you want it bolted down and mark
the floor through the holes in the bottom of the safe.
4
Move the safe and drill holes in the floor with a 5/8 inch masonry bit.
5
Reposition the safe over the holes and install the four (4) Concrete Bolts.
6
To prevent heat from entering the safe during fire, fill the holes with a
high temperature silicone caulk.
NOTE:
Caulk is not included. Purchase from your local hardware store.
7
Replace the four (4) Bolt Down Hole Caps and interior shelving.
12
11
troubLe SHootinG Guide
ProbLeM
SoLution
I lost the combination to my safe. What do I do?
For your protection, the most important aspect of this process
is for us to verify the true ownership of the safe. Please
go to www.firstalert.com and click on the COMBINATION
/ KEY REQUEST page and follow the instructions. Once
completed, fax or mail the forms to us for processing.
What kind of battery do I use
in my electronic lock?
High security electronic safe locks are very sensitive to
battery power. All of our safe locks require a 9-Volt ALKALINE
ENERGIZER or DURACELL. Most likely, your lock will not
operate properly if a battery other than this is used.
How do I remove the pallet from my safe?
Visit the FAQ section on www.firstalert.com.
How do I replace the battery
in my electronic lock?
Please refer to Pg. 6 BATTERY INSTALLATION. Make sure you
use only a 9-Volt ALKALINE ENERGIZER or DURACELL battery.
How do I change the combination
in my electronic lock?
Please refer to Pg. 9 PROGRAMMING THE LOCK.
I enter my code in the electronic lock and I get
(3) three “beeps”, and the lock will not open.
The (3) three “beeps” indicates that the lock does not
recognize the code you entered as being valid. Verify your
code and enter it again. If the lock still does not open, please
go to www.firstalert.com and go to the COMBINATION
/ KEY REQUEST page and follow the instructions. Once
completed, fax or mail the forms to us for processing.
boLtinG Your SaFe to tHe FLoor
