Firmtech FZ200BS, Руководство пользователя

Страница: 31 / 36

FZ200BS Manual VERSION 0.1.0
31
(1) Turn the power of FZ200BS set to Coordinator ON.
(2) Turn the power of Router and End Device which are supposed to make 1 Depth ON.
- You can create Devices in 1 Depth up to 8.
(3) Turn the power of Router and End Device which are supposed to make 2 Depth ON.
- You can create Devices in 2 Depth up to the number of Router in 1 Depth * 8.
- Devices are automatically created in 1 Depth if any seats are available in 1 Depth.
(4) Turn the power of Router and End Device which are supposed to make 3 Depth ON.
- You can create Devices in 3 Depth up to the number of Router in 2 Depth * 8.
- Devices are automatically created in 1/2 Depth if any seats are available in 1/2 Depth.
(5) Turn the power of Router and End Device which are supposed to make 4 Depth ON.
- You can create Devices in 4 Depth up to the number of Router in 3 Depth * 8.
- Devices are automatically created in 1/2/3 Depth if any seats are available in 1/2/3 Depth.
10-3. [Set-up] target device & traffic
Set target device of each Device after the Zigbee Network is configured.
Save an IEEE ADDRESS of target device by using a command “AT+SETTARGET”
Reset the Device so that its target device set-up can be processed.
< It is not recommended that there is a lot of traffic in the Zigbee Network. >
Refer to the meanings of Traffic in terms of Zigbee Network.
The Traffic is caused by “Zigbee Device which performs data transmission in the Zigbee Network”,
“Zigbee Device which performs data transmission to get its target device”, “Zigbee Device which
transmits data to its target device” “ACK data for checking if Zigbee Device transmits data its target
device properly”, and “Transmitted data for checking if the Zigbee Network works properly.”
There is no traffic in case of Coordinator and Router unless they are turned ON again.
Coordinator and Router are always turned ON because they intermediate Devices.
In case of End Device, a lot of traffic is caused because the power of End Device is turned ON and
OFF repeatedly.