FB200AS-F User Guide
Version 1.0
10
Connecting the wireless section of Bluetooth
Page 15 / 27
10 Connecting the wireless section of Bluetooth
In order for Bluetooth devices to transmit data to each other, the wireless section of Bluetooth should be
connected to each other. To connect the wireless section, you should set each role for each device, one for a
MASTER
, another for a
SLAVE
. It takes about 1~10 sec that a Master is connected to a Slave.
How to connect the wireless section of FB200AS-F can be performed with 2 significant ways.
Note :
The FB200 uses virtual COM port which shall be operated first before the Hyper Terminal is being
used so that the config tool shall be operable normally.
Please refer to the driver installation of Appendix D FB200 for the instructions of driver installation
of FB200.
※ We will use 2 FB200AS-F and MS Windows in describing procedures.
10.1 Connecting with Connection WIZARD
(1)
Connect FB200AS-F(1) to the USB port of PC, and turn the power on.
(2)
Execute C-Wizard Program.
<Figure 10-1 Connection Wizard Step 1>
(3)
Click FIRMTECH SLAVE Set-up button (<Figure 10-1> Blue borders)
