07
1. LCD Display
Displays the various conditions of the Portable Power Station.
2. LCD Display ON/OFF button
The screen will turn off after 30 seconds. You can turn it on by pressing LCD display ON/OFF button.
3. USB-C Output Port
Devices that charge through a USB-C port, such as a MacBook Pro, Android phone, or other devices
can be charged by the FIRMAN ZERO E USB-C port.
4. Power ON/OFF Button
9.
USB ON/OFF Button
Press the power button to turn FIRMAN ZERO E on. When FIRMAN ZERO E is turned on, the LCD
Display Screen will light up. Press and hold the power button 3 seconds to turn FIRMAN ZERO E off.
Press USB ON/OFF Button to turn on or off FIRMAN ZERO E USB power. The USB ON/OFF button controls
the FIRMAN ZERO E’s USB output and Wireless charging .
6. Battery power display button
Press the battery power display button, the LCD will show Portable Power Station battery power
percent of home unit and each Power Pack (if connected). After pressing the button, if there is no
operation within 10 seconds, the screen will automatically change to the main interface.
5. USB-C Output/Input Port
Devices that charge through a USB-C port, such as a MacBook Pro, Android phone, or other devices
can be charged by the FIRMAN ZERO E USB-C port.
The Portable Power Station can be charged through this USB-C port.
10. WIRELESS CHARGER
Provides up to 10W wireless power to charge wireless charging equipment.
11. 120V,30A NEMA TT-30R (Not GFCI protected)
A maximum of 30 Amps current may be drawn from this receptacle.
FEATURES
12.
120V, 20A NEMA 5-20R (Not GFCI protected)
A maximum of 20 Amps current may be drawn from these receptacles.
English Customer Service: 1-844-FIRMAN1
The Power Indicator Light will light up when start the ZERO E. The Power Indicator Light will turn
red when abnormality occurred in the unit.
7.
Power
Indicator Light
8.
USB-A Output Ports
Charge a wide array of devices such as your iPhone, tablet, GoPro, speakers, or similar products
that use a USB-A port.
13.
20A Circuit Breaker
The 5-20R receptacles are protected by an AC circuit protector. If the Portable Power Station is
overloaded or an external short circuit occurs, the circuit protector may trip. If tripping occurs,
disconnect all electrical loads and determine the cause before attempting to continue using the
Portable Power Station. Reset any tripped circuit protectors.
