Firich Enterprise BP-363, Руководство пользователя

Страница: 28 / 30

27
C
C
h
h
a
a
p
p
t
t
e
e
r
r
5
5
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
Please note that the following troubleshooting guide is designed for people with strong computer
hardware knowledge such as System Administrators and Engineers.
Display Shows “No Signal” Before Loading into Windows OS
A) Check if the VGA cable is getting loose while loading the system.
B) If the monitor is not connected to the VGA port before power on the system, the
Windows OS may automatically choose LVDS to be the primary display. As a result, the
monitor (VGA-connected device) will then be defined as the 2
nd
display and “No Signal”
will show on the screen. To switch the monitor back to the primary display, please
connect a keyboard to the system and press
Ctrl + Alt + F1 simultaneously.
Cannot Detect HDD
A) SATA cable is not connected properly to main board or it could be defective.
B) HDD power cable is not connected properly to the main board or it could be defective.
C) Check CMOS setup, set SATA HDD to Auto Detect.
D) On-board IDE port could be defective.
LAN Is Not Functioning Properly
A) Check if the LAN driver is installed properly.
B) Check if there are any IRQ conflicts.
C) Check if the RJ45 cable is properly connected.
D) The on-board LAN chip could be defective.
COM Ports Are Not Functioning Properly
A) Check if the I/O ports are enabled in the CMOS setup.
B) Check if there are any IRQ conflicts.
C) The main board or I/O board could be defective.