24
© 2020 Carrier
8.2
Change the MB485ETH-CG IP Address
Configure the IP settings of the MB485ETH-CG using the following methods:
•
When using the Ethernet port to connect to the local network (
Section
).
•
When connecting the MB485ETH-CG to a local wireless network, configure the Wi-Fi Client
Settings in the MB485ETH-CG (
Section
).
•
When updating Wi-Fi Access Point settings, configre the (
Section
8.2.1
Common Settings
The Common Settings make it possible to choose the primary connection when both Ethernet and Wi-Fi
Client connections are available.
NOTE: The default Primary Connection is Ethernet.
•
Select the desired option from the drop-down menu.
•
Click the Save button, then click on the Confirm button in the pop-up window to activate the new
settings.
NOTE: If using Wi-Fi Client and not Ethernet, change Primary Connection to Wi-Fi.
NOTE: The fields below the update button show the settings as they were set in the IP Settings or
Wi-Fi Client pages. They are not editable on the Common page.
Figure 22: Common Network Settings