46
THE FILE COPY MENU
Copy FROM File
The source file to Copy from. Valid files are 3 factory configured files (F1, F2, F3) and user configu-
rable files (A, B, C, D).
Copy TO File
The destination file where the source is copied to. You may copy
from
any file
to
a user file. You are
not allowed to copy
from
a user file to a
factory
file. Valid files are (A, B, C, D).
PUSH PROGRAM KEY TO COPY xx TO x
When the Source file and Destination file have been selected, press PROGRAM to complete the file
copy action. The display will read File Copied when the copy is complete.
Note: You are not allowed to copy to the file you are copying from. i.e. If you attempt to copy from A
to A you’ll get “Aborted Copy”.
SELECT to Exit BACK to CONFIG
Return to top of the Config Menu.
SELECT to Exit BACK to MAIN
Return to top of the Main Status Menu.
The file copy function allows the user to copy the contents of one internal scanner file to
another.Models have four user configurable files, “A, B, C, D”, plus three factory configured files,
“F1, F2, F3”.
You may copy
from
any file
to
a user file. You are not allowed to copy
from
a user file to a
factory
file. You must first enter the source file, then the destination file.
The
Factory Configured Files
(“F1, F2” and “F3”) contain factory default settings.
In File “F1”, the IR and UV User Gain values are set at 31. The IR and UV flicker frequencies
(BAND) are set at 23 Hz.
The IR and UV FEG LRNED settings are 255
. At these settings the
scanner will respond to flame but will not likely discriminate between the target flame and other
nearby flames.
In File “F2”, the IR and UV User Gain values are set at 15 and the IR and UV flicker frequen-
cies (BAND) are set at 23 Hz. The IR and UV FEG LRNED settings are 255.
At these intermedi-
ate settings the scanner may not respond to flame, and/or may not properly discriminate until the
scanner is further tuned.
In File “F3”, the IR and UV User Gain values are set at 1. The IR and UV flicker frequencies
(BAND) are set at 179 Hz.
The IR and UV FEG LRNED settings are 5.
At these settings the
scanner will not likely respond to flame until the scanner gain is increased.
Note: As shipped, all user files (A, B, C, D) contain the same setpoints as factory file “F3”.
EXAMPLE:
With “SELECT to Enter File Copy Menu” displayed (CONFIG
menu), depress the SELECT key.
The display will read “Copy FROM File F1” with “F1” being the source file. Press SELECT and use
the UP/DOWN keys to select a different source file if desired.(F1, F2, F3, A, B, C, D)
With the desired source file displayed, press the PROGRAM key. NEW VALUE SAVED will
appear.
Press DOWN key to “Copy TO File” display and the destination file will appear (e.g. “Copy TO File
A”). Press SELECT and use the UP/DOWN keys to select a different destination file if desired
(A,B,C,D). Press PROGRAM to SAVE new destination value.
Press the DOWN key to display PUSH PROGRAM KEY TO COPY F1 TO A, then press PRO-
GRAM key to copy the source file to the destination file. The display will read “FILE COPIED”.