01-UDBRG.A_V1-DIMU-00-EN
SAFETY
10
Wear rubber gloves, goggles or a face shield and protective clothing when using
the appliance.
Risk of scalding!
The machine controls can only be hand operated. Damage caused by the use of
pointed, sharp and similar objects shall void any warranty claims.
It is essential to wash the inside of the cooking pan thoroughly before setting up
the appliance for first use.
The cooking pan must be filled respecting the minimum and maximum values
(including the food to be cooked) indicated in the table depending on the cooking
method.
When emptying the pan, the operator must position him/herself on the right-hand
side of the machine (control side) being careful of any hot content spilling from
the pan and avoiding any splashes.
The operator must also ensure that any persons present in the room maintain a
safe distance of at least 2 metres from the perimeter of the machine, both while
emptying and replacing the pan.
The pressure cooking phases must be carried out with particular care as indicated
in this manual.
When opening the lid pay particular attention to the steam escaping from the vent
on the lid and from the front of the lid.
Do not use the "PRESSURE" cooking functions for frying operations
.
Take particular care during operation as the surfaces become hot.
When filling the pan with water, using a tap or shower (optional), make sure that
there is no hot oil in the pan.
The appliance must be disconnected from the power supply during cleaning,
maintenance and replacement of the internal parts.
When cleaning the appliance, never use jets of water or a steam cleaner to avoid
infiltration and damage to components.
Most cleaning products are harmful to the skin, eyes, mucous membranes, and
clothes. Precautions must be taken. Wear rubber gloves, safety glasses/goggles
or a face shield, and protective clothing. Read the warnings carefully and follow
the directions on the label of the detergent.
The floor may be slippery in the area around the appliance.
If the power cord is damaged, it must be replaced by the manufacturer or by a
servicing company or a similarly qualified person in order to avoid hazards.
