SAM-A1 Owner’s Manual
FSL0132
Fireworks Solutions Limited (FSL) has proprietary rights in the information disclosed herein. The recipient, by accepting this document agrees that neither this document nor the
information disclosed herein nor any part(s) thereof shall be produced in any manner whatsoever or transferred to other documents or media or used or disclosed to any third party
for any purpose except as specifically authorised in writing by FSL. All rights reserved under the copyright laws.
FSL0132 Version 5.1 © 2020 Fireworks Solutions Limited Page 10
4.
Getting to know the SAM-A1
4.1.
Connections and controls
On the rear of the amplifier you will find the following connections:
1)
Mains supply input socket (a 90 degree plug reduces the space needed behind the amplifier).
2)
Power Switch (shown here in the OFF position, switch down is ON).
3)
A pair of input sockets (RCA) for connection to your pre-amplifier or direct to your source.
4)
Two pairs of 4mm sockets/wire termination posts for connection to your loudspeakers.
On the front of the unit there is the volume control. Fully anti-clockwise = zero volume, turn it
clockwise to increase the volume – always start at minimum volume position when switching on
for the first time!
1
2
3
4
