SETTINGS
FEATURE SETTINGS
USER INPUT
1
ENABLE
Use arrows to enable or disable the user defined alarm. Press to confirm.
1
ON DELAY
Use arrows to select an on delay time before the alarm is acknowledged (0-99 seconds).
Press to confirm.
1
AUDIBLE
Use arrows to select if the user input activates the audible alarm. Press to confirm.
1
COMMON ALARM
Use arrows to select if the user input activates the common alarm output. Press to confirm.
1
ON MESSAGE TEXT
Use arrows to program the message that is displayed and recorded when the user defined alarm is acti-
vated. Press to confirm.
1
OFF MESSAGE TEXT
Use arrows to program the message that is displayed and recorded when the user defined alarm is deacti-
vated. Press to confirm.
SETTINGS
FEATURE SETTINGS
CYCLE INTERVAL
1
ENABLE
Use arrows to enable or disable the cycle interval counter (number of start/stop cycles during a specific time
period). Press to confirm.
1
DATE FORMAT
Use arrows to select required date format (mm-dd-yyyy, dd-mm-yyyy, yyyy-mm-dd).
Press to confirm.
START DATE AND TIME
Use arrows to select the desired start date. Press to confirm.
1
1
Use arrows to select the desired start time. Press to confirm.
END DATE AND TIME
Use arrows to select the desired end date. Press to confirm.
1
1
Use arrows to select the desired end time. Press to confirm.
SETTINGS
FEATURE SETTINGS
1
OPERATORS CHOICE 1
The operator can choose 2 lines of information to be shown on the main screen of the display. Available options are;
stop pressure setting, start pressure setting, cycles/period, cycles/month, cycles/day, cycles/hour, total cycle count,
pump total run time.
Use arrows to select the desired information to be displayed on line 1 (below status and pressure information).
Press to confirm.
SETTINGS
FEATURE SETTINGS
1
OPERATORS CHOICE 2
The operator can choose 2 lines of information to be shown on the main screen of the display. Available options are;
stop pressure setting, start pressure setting, cycles/period, cycles/month, cycles/day, cycles/hour, total cycle count,
pump total run time.
Use arrows to select the desired information to be displayed on line 2 (below status and pressure information).
Press to confirm.
SETTINGS
FEATURE SETTINGS
1
RESET CYCLE COUNTS
Note: Once cycle counts are reset to zero, the previous cycle counts cannot be recovered.
Use arrows to enable or disable the reset cycle counts option. Press to confirm.
10
