Firetide HotPort 3103 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 32

Firetide HotPort 3103 Скачать руководство пользователя страница 21

HotPort 3100 Series / 3500 Series Indoor Mesh Nodes

15

HotView

TM

Workstation

HotPort

TM

Outdoor

Mesh Node

HotPort

TM

Indoor

Mesh Nodes

Getting Started

To configure a new mesh network, it is recommended to first install all of

the nodes with the factory default configuration and then change them to

the desired settings, using the included HotView software. You may wish

to do the initial setup in a staging area, where you can easily see all of the

nodes at the same time. The HotView (and HotView Pro) software lets you

change the settings (ESSID, channel, encryption, IP address, and so on) on

all nodes in one batch operation, rather than changing one node at a time.

This will save you time and ensure that every mesh node is configured the

same way.

HotView mesh management software provides a convenient interface for

setting up HotPort mesh nodes and monitoring the mesh network. Because

wireless connections between HotPort nodes are invisible, this software lets

you “see” which units are within direct range of each other. HotView also

provides additional security and optional configuration features. HotView

is a Java-based application compatible with most Internet browsers and

personal computer platforms, including Windows, Macintosh, and Linux.

Registered users can download HotView software updates and documenta-

tion from the Firetide web site: www.firetide.com.

This manual provides basic configuration instructions to allow you to set up

and check your mesh network as quickly as possible using HotView. Refer to

the HotView user documentation included on your HotPort CD for complete

instructions on using this powerful software tool.

Connecting the HotView Workstation to the Mesh Network

HotView must be installed and running on a computer or workstation

connected to the mesh network. Refer to the HotView documentation for

workstation specifications and requirements. The recommended way to con-

nect to workstation to the mesh is shown in the diagram below.

Connecting a Workstation Running HotView Mesh Management Software

1. Be sure all of your HotPort nodes are installed and powered.

2. Connect your workstation’s network adapter directly to any one of the

HotPort nodes using an Ethernet cable.

3. Turn on your workstation and configure your TCP/IP settings to:

• IP address: 192.168.224.100

• Subnet mask: 255.255.255.0

• Gateway is not used

4. Refer to your operating system documentation if you need assistance in

setting the static IP address specified in step 3.

«
...
19
20
21
22
23
...
»

Содержание HotPort 3103

































Отзывы:

Нет отзывов