Firetide HotPort 3103 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 32

Firetide HotPort 3103 Скачать руководство пользователя страница 13

HotPort 3100 Series / 3500 Series Indoor Mesh Nodes

HotPort 3103 Front Panel with Indicators

HotPort Product Description

Front Panel LED Indicators

Indoor HotPort nodes have eight indicator LEDs on the front panel. Upon

power up, all eight LEDs will illuminate continuously for several seconds

until the startup sequence is complete. The post startup functions of the

LEDs are described below.

Power LED

This indicator remains continuously on to indicate that HotPort node is

receiving power.

Fault LED

After start up, this indicator color will change from YELLOW to OFF to indi-

cate normal conditions. If the indicator remains on or comes back on, this

indicates a fault condition.

1, 2, 3, 4 Port LEDs

These four indicators are numbered to correspond to the four rear panel

Ethernet ports.

• Continuously on = link but no activity

• Flashing = link and activity

• Indicator off = no link

Mesh LED

This LED illuminates when the HotPort node connects wirelessly to one or

more HotPort nodes. If this LED is off, the node is not connected to any

other nodes.

Status LED

This indicator will indicate the node status as follows:

• LED on = node is operating OK

• LED off = this node is disabled

«
...
11
12
13
14
15
...
»

Содержание HotPort 3103

































Отзывы:

Нет отзывов