fireTEK FTM-48F Series, Быстрое руководство

Страница: 11 / 13

7. Use of one device as Standalone (without remote)
Precondition: Module is
programmed.
1. For safety reasons to use the
module without a remote you
will need to press and hold green
button while you power on
module until INIT appears on the
screen.
2. Module is now ready to use and
showing rail status on the
screen.
3. Short press green button to go in
TEST state.
4. To arm the module you will need
to press and hold green button
until module state changes to
ARMED.
External trigger control:
1. To be able to control the system via external
trigger you will need to give an impulse on
external trigger connector and the second
battery will be displayed as ET.
2. Go in test mode where you can test the
external trigger without starting the script. In
TEST state everytime the module receives an
impulse on external trigger ET will become AT
for a second.
11 05/2018