Installing the Stove
This appliance is not suitable for installation on any water born vessel,
caravans or any form of mobile home.
Clearances From Combustibles
Side
550mm
Rear
700mm
Stove weight
87Kg
Positioning:
The overall dimension of the stove is shown in above. The table above indicates recommended
distances between the stove and surrounding combustible materials. As a rule, any surrounding
combustible material should not exceed 80°C. There should be sufficient space around the stove for
service work.
Hearth:
The construction of the hearth must conform to Building Regulations, must be firm, non-
combustible and capable of supporting the stove. (Refer to Building Regulations Document J).
Flue Connection:
The flue pipe used to connect the stove to the chimney is 5” (125mm) in diameter. The stove is
supplied ready for top flue or rear flue connection. To change to rear connection the flue blanking
plug supplied with the stove is used to block the top flue outlet. The blanking plug in the rear flue
connection must then be removed.
