FIRESIDELODGEFURNITURE.COM | 877-568-6188
1
Parts needed:
1
-
Log
Headboard
1 - Log Footboard (end with built-in ladder)
2 - Assembled Bunk rails (one right; one left)
1 - Bundle of 5 Slats
10 - 1 5/8” Wood Screws for slats
1 - Plywood for Upper Bunk (bottom bunky boards are optional)
8 - 1 5/8” Wood screws for Upper Bunk plywood
2 - Log Side Rails (81” Long for Single & Double Beds & 86” Long for King & Queen Beds)
16 - 6” Lag Screws and washers for Single/ Single, Double/ Double, Queen/ Queen beds
OR
12 - 6” Lag screws for Double/ Single, Queen/ Single beds
6 - 1 1/2” Diameter Log Bed Plugs (for holes to hide/cover lag screws)
5 - Support Rails (for Double/Doubles, Double/Queens, and Queen/Queen bunk beds ONLY)
see step 11 below
2 - Secondary bed rails (without notches) (for Double/Doubles, Single/Singles and Queen/Queen ONLY)
1 -
T-25 Bit (Torx bit screwdriver)
King & Queen Beds Only
• T-Support - (consists of 2 approx 7”x75” boards to be assembled)
• 8- 4” T30 screws
• 1-T30 driver bit (Torx)
CHECKING/CRACKING:
It’s normal for all cedar log furniture to develop some checks in the wood. Checking occurs as a log releases moisture across or
through the annual growth rings. It does not affect the structural integrity of the wood. All logs which contain the heart of the
tree will develop lengthwise cracks or checks. The check never goes deeper than the heart.
Cedar Bunk Bed Assembly Instructions
Tools Needed for Assembly:
15/16” Socket & Ratchet (or Impact Driver)
Cordless Drill with Phillips Head
Rubber Mallet if required
IMPORTANT! Please read and follow the Bunk Bed Safety instructions on the last page of this instruction packet.
This product is designed to provide the safety levels of this certification when the assembly instructions are properly followed.
Completing assembly as instructed will make beds safer.
