www.FireSales.nl
FireSales Soundbox Small V2
EN
User Manual
FireSales Soundbox Small V2
PLEASE NOTE:
charge batteries 24 hours before first use.
Power the
SoundBox small V2
1.
Installing the batteries, first turn battery cover fixture anti-clockwise to loosen and pull
down the battery cover.
Note:
Before you insert the batteries, if you use non-rechargeable batteries,
make sure the NiMH/Alkaline switch is switched to Alkaline position.
2.
Insert 6 x C size (UM-2) batteries into the compartment. Ensure the batteries are
completely inserted in accordance with the diagram shown. Close the battery cover and
fasten the fixture by turning clockwise.
Reduced power, distortion and a “stuttering sound”, or low battery sign flashing on the LCD display are
all signs that the batteries need replacing or recharging (see below Charging the batteries). Run time
of the radio on batteries varies strongly depending on the quality and capacity (mAh) of the batteries,
temperature, volume level etc.
3.
AC Operation
Before plugging the AC power cord into the AC socket, be sure the voltage is correct. If
you have batteries in the radio and connect AC power cord into the AC socket, the batteries
will automatically be disconnected. AC cable hook is designed to store the AC power cord
when the radio is not in use.
Charging the batteries
Reduced power, distortion and a “stuttering sound” or low battery sign flashing on the LCD display are
all signs that the batteries need recharged if you use rechargeable batteries to power the radio.
4.
Use
16
