FirePro FPC-5V2, Инструкция по эксплуатации и руководство пользователя

Страница: 3 / 20

FPC-5V2 April 2019
2 | P a g e
This Operation & User Manual provides information on the FPC-5V2 fire protection module
and how it is connected to the various
FirePro Condensed Aerosol Generators.

Autonomous fire suppression unit

Primary power source: 3Vdc battery.

Battery monitoring feature with LED - indication.

Manual or Automatic battery status indication.

Single input detection loop.

Linear heat detector cable or a bimetallic sensor
c
onnections
Figure 1: FPC-5V2 module.

The FirePro fire protection module detects fire by using either a linear heat detector
cable or a bimetallic sensor and activates the condensed aerosol fire suppression
generators automatically in electrical cabinets and similar enclosures.
Figure 2: Fire detection devices.

Input detection terminal (J7 on the PCB) is available for connecting the linear heat
detector cable or a bimetallic sensor. Output terminal (J6 on the PCB) can be used to
connect the condensed aerosol fire suppression generator. Both J7 & J6 terminals
are not electrically polarized.
+
-
Figure 3: Interconnecting the fire detection devices.