-1-
-2-
-3-
Thank you for purchasing our smoke alarm!
Please read these ins
arefully and store them in a safe place
where you can access them easily.
Pr
tended use
This is a smoke alarm with r
al sensor for
installa
esiden
ts and rooms with
residen
e use. Smoke alarms are designed to provide an early
warning of fire smoke and fires to persons present, so that these persons
can react appropriately to the hazardous event. Always consult local
regula
or smoke alarms.
Product specifica
Det
:
al
Power supply :
Ba ery lif
: 10 years
Alarm volume
: ≥ 85 dB (A) at 3 meters
Monitored area
: 40 m²
Opera
emperature : 0 °C - 45 °C
Opera
: < 93 %
Date of replacement : See product label
Individual alarm indicator : Yes
Alarm silence facility :
Low ba ery warning : Yes
Low ba ery silence facility : Y
: 10 hours
Installa
e
accommoda
ehicles : No
Moun
a
: Ceiling or wall
Interconnectable : Yes | max. 40 devices
Wireless frequency : 433.42MHz
Wireless distance
: ISO 8201 BI 0.5s - pause 0.5s - BI 0.5s -
pause 0.5s - BI 0.5s - pause 1.5s, with the
: Max. 100 meters in free field
Warnings:
•
To prevent injury, this apparatus must be securely a ached to the
ceiling/wall in accordance with the installa
•
Ba eries should not be exposed to excessive heat such as sunshine,
fire or the like.
•
Do not paint or cover the smoke alarm.
Where to install a smoke alarm
Smoke alarms must be installed in such a way that they can be reached
unhindered by the fire smoke so that fires can be reliably detected during
the development phase.
•
Install at least in sleeping areas (especially children's rooms).
•
Install at least in escape rooms.
•
In the middle of the ceiling of a room.
•
At least 50 cm away from the wall and other objects.
•
Maximum installa
t of 6 meter.
•
on the wall. The distance to the ceiling should be between 30 and 50
Where to install a smoke alarm in rooms
with special geometries
•
Corridors with a maximum width of 3m: Max. 15m between 2 smoke
alarms. Max. 7,5m to the front side of the gallery and smoke alarms
at edges/crossings of corridors.
•
Rooms with sloping ceilings:
- If the ceiling inclina
o the horizontal: Smoke alarms
must be installed at least 0.5 m and at most 1 m from ceiling top.
- P
oof slopes: If the flat ceiling is ≤ 1m wide, consider as ceiling
inclina
t ceiling is >1m wide, consider as flat
ceiling.
•
Rooms with subdivided ceilings:
- Height of the subdivisions is ≤ 0.2 m: Beams without considera
smoke alarm may be installed on the beams as well as on ceiling.
- Height of subdivisions is > 0.2 m and area of ceiling panels > 36 m²:
Smoke alarm should be installed in each ceiling panel.
- Height of subdivisions > 0.2 m and area of ceiling panels ≤ 36 m²:
Individual ceiling without considera
Where not to install a smoke alarm
•
In an environment with a high risk of draught (e.g. close to air
c
, fans and ven
ement of air can
impair the penetra
e smoke into the smoke alarm.
•
Areas where combus
egularly occurs, such as kitchens.
•
Areas with high humidity such as bathrooms, or close to devices such
as dish washers or washing machines.
a
Before commissioning the smoke
alarm, it is important t
ate it
and test it for correct opera
•
Push the
a
ch to
the right.
When the smoke alarm is
ated, the LED lights up.
•
Test the corr
a
our
smoke alarm by pressing the test
on. If no sound is generated,
the smok
ated
properly and should not be used!
Connect your smoke alarms
1. Choose one smoke alarm as the master smoke alarm.
2. Turn your master smoke alarm into the connect mode by quickly
pressing the tes
3. The red LED will light up red, followed by the blue LED. This indicates
that the smoke alarm turned into the connect mode in which it
remains for 30 seconds.
4. Turn the next smoke alarm into the learn mode by quickly pressing
the tes
5. The red LED will light up, followed by the green LED. This indicates
that the smoke alarms are connected to each other.
6. Repeat step 4 to 5 for c
e smoke alarms. Make sure that
you always use the same master smoke alarm!
7.
Reset c
1. Disconnect the smoke alarm you want to reset by removing it from
the moun
t
a
ch to the le
with a screw driver.
2. Press and hold the tes
ate the smoke alarm again by
a
ch to the right.
3. Hold the tes
on while the LED lights up red and release it when
the LED turns of.
4. When the LED lights up again, press the tes
on.
5. The LED will start flashing to indicate that it the network is being
cleared.
6. When the LED turns off, the c
fully cleared.
7. Repeat step 1 to 6 for disc
e smoke alarms.
Minimum
Res
backside smoke alarm
Test &
LED indicator
Sound output
Test if the your smoke alarm were connected successfully by pressing
will beep twice per second for ten seconds and led flash twice per
of each alarm.
a
switch
ated
