564 SS & 25K Fireback Installation
96100179, 96100187, 96100192, 96100270, 96100204
Page 6 of 6
17601465 - 1/23/20
Travis Industries, Inc.
3. Install the firebacks following the directions below.
Place the rear fireback in place. The side
fireback holds the rear fireback in place -
hold the rear fireback while installing the
side fireback.
Remove the clip located on the
firebox ceiling near the front (both
sides). The side fireback clip has
a keyhole slot. It can be removed
by loosening the screw and
sliding the clip out.
Place the side firebacks
in place.
a
1/4" Nutdriver
c
Replace the clips removed in
step “a” to secure the side
firebacks..
e
d
NOTE: Place the fireback
so the vertical grout line on
the edge of the fireback is
facing the rear.
Loosen this screw and slide the bracket up. Place the floor
firebacks in place (under the bracket). Slide the bracket
down and tighten the screw to secure the firebacks.
b
Due to the construction of the ceramic firebacks, you may need to re-position the
firebacks to achieve correct alignment.
4. Restore the fireplace to the correct configuration.