O
PTIONAL
E
QUIPMENT
(C
ONTINUED
)
P
AGE
39
Decorative Firebacks
(Classic Fireback - Part # 98500735 Brick Fireback - Part # 98500736)
The decorative cast firebacks come in two different styles and attach to the walls of the firebox to
enhance the aesthetic quality of the fireplace. The directions below detail their installation.
!
Turn the gas control valve to "OFF" prior to conducting any service.
1
The faceplate, glass, and log set must be removed prior to installing the decorative firebacks. See
pages 24, 22, and 23 for instructions.
2
Use a 5/16" nutdriver to remove the nine screws shown in the illustration below (the screws included
with the kit screw into these holes).
3
Line up the holes in the plates with the corresponding holes in the firebox walls. The side plates are
marked "Left" and "Right" on the back to differentiate the two sides. Insert the screws included with
the kit through the plates and into the walls of the firebox to secure the plates in place.
ADDENDUM #1 Altitude Considerations
This fireplace has been tested at altitudes ranging from sea level to 8,000 feet. In this testing we have
found that the fireplace, with its standard orifice, burns correctly with just an air shutter adjustment. For
information on adjusting the air shutter see page 25 of this manual.
!
Failure to adjust the air shutter properly may lead to improper combustion which can create a safety
hazard. Please consult your dealer or installer if you suspect an improperly adjusted air shutter.
