P
AGE
28
O
PERATION
(C
ONTINUED
)
Starting the Fireplace for the First Time
+
Fumes from the paint curing and oil burning off the steel may occur the first time you start your
fireplace. This is normal. We recommend you open the window to vent the room.
+
Condensation may appear on the glass each time you start the fireplace - this is normal.
+
Blue Flames will occur on the fireplace when it first comes on. After fifteen minutes the flames will
turn a more realistic yellow and orange color.
?
Certain installations use a remote "wall switch" to turn the fireplace on and off. If this is the case,
leave the ON/OFF switch "ON".
Turning the Fireplace On and Off
PILOT
IGNITER
ON
OFF
MAIN BURNER
Use this switch to turn the
fireplace on and off
manually. Leave it on if
using a remote or thermostat
After the pilot has been started, the fireplace may be turned on and off by...
For systems with remotes,
make sure the On/Off Switch
shown to the left is on. Then
use this button here to turn the
fireplace on and off.
For systems with thermostats,
make sure the On/Off Switch
shown to the left is on. Then
use this switch to control the
temperature (right is hotter,
left cooler).
See the optional
equipment instructions
for installing the battery.
!
Do not place any combustible items on top of or directly in front of the fireplace, even temporarily.
The optional thermostat may start the fireplace causing a combustible item to ignite.
?
If the fireplace turns on and off frequently while using the thermostat, you may want to adjust the
flame height down until it produces just enough heat needed.
Adjusting the Flame Height
+
Your fireplace has an adjustable flame to tailor the look and heat output to your specific needs. It is
adjusted by turning the middle dial on the gas control valve.
Flame Height
Adjustment Knob
Index Mark
Turn clockwise to adjust the flame higher, counter-clockwise to lower.
PILOT ADJ
VENT
T
O
L
PI
ON
OFF
HI
LO
VENT
HI
LO
