background image

Kompact AG Installation—November 2018                                                                                                                                                    43

 

 

   

 

10

 

For  information  (including  claim  procedures)  concerning  potential  claims,  potential         

warranty claimants should contact: 

 

          

-

 in the first instance, the retailer/dealer from whom the Firenzo wood fire was  originally          

purchased or 

 

-

 (if the retailer/dealer is not contactable or does not address the claim to the claimant

satisfaction) Firenzo at the specified address, 

 

including as appropriate to arrange an inspection of the Firenzo wood fire.

 

11

 

After  complying  with  paragraph  10,  for  valid  claims,  a  warranty  claimant  must  submit  a 

comple ted warranty claim form (please see Firenzo

s website, or contact Firenzo, for this form) 

or  other  form  acceptable  to  Firenzo  providing  details  of  the  consumer

s  warranty  from  the      

Warranty Registration Card (including its date of issue) and specifying the defect: 

 

-

 to the retailer/dealer from whom the Firenzo wood fire was originally purchased; or

 

-

 to Firenzo at the specified address.

 

12

 

The  warranty  claimant  is  responsible  for  paying  any  service  call  fees,  transport  charges 

and for any damages and loss incurred in transit to the Firenzo wood fire or its component parts 

and materials, to and from Firenzo or its designated accredited agent. Where Firenzo honours a 

warranty,  as    described  in  paragraph  13,  it  will  reimburse  the  warranty  claimant  any                      

transportation costs they have incurred.

 

13

 

Firenzo  or  its  designated  accredited  agent  (please  see  paragraph  16)  will  replace  any   

component parts and materials covered by the warranties or the entire Firenzo wood fire, at its 

discretion,  where  Firenzo  is  reasonably  satisfied  a  defect  is  solely  due  to  faulty  Firenzo          

workmanship or materials.

 

14

 

Firenzo may decline (in whole or part) to honour a warranty claim:     

 

-

 until any amounts due but unpaid by a consumer in respect of the Firenzo wood fire or 

its     servicing are paid.

 

-

 until Firenzo is provided with the applicable compliance and installation permits (please 

see below);

 

-

 if it appears to Firenzo that the Firenzo wood fire has:

 

-

 not been installed correctly at the specified residential address, or not been  

 

 operated  and  maintained  strictly  in  accordance  with  the  manufacturer

s            

instructions, AS/NZS 2918:2001 and any relevant building code or consent or 

these warranty terms.

 

not  been  inspected  and  confirmed  after  installation  as  a  compliant  installation 

(with the requisite specifications and permits);

 

not been regularly maintained and at least annually serviced;

 

-

 been subject to misuse, neglect, or accident in transit, storage or use.

 

-

  been  damaged  by  water  ingress  in  any  way,  including  any  surface  rust  which 

has     occurred in transit or storage. However this exclusion will not apply to 

any  damage  to  the  Firenzo  wood  fire  which  is  determined  to  have  been 

caused by wetback leakage attributable to faulty Firenzo component parts or 

materials or workmanship;.

-

 been over fired or has used any fuel other than 

clean  dry  firewood  (having  25%  or  less  moisture  content),  including  any  

chemically treated timbers or driftwood. 

 

-

 if it appears to Firenzo that the defect is attributable to a failure to replace  consumable 

parts or components or materials within a timely manner to maintain their durability. 

 

 

Содержание Kompact AG Series















































Отзывы: