5
Flue/Chimney
The minimum flue draught required for nominal heat output is 12 Pascals. The appliance should not be
connected to a shared flue.
The stove is typically installed using a 6
”
twin wall flue system
. See ‘
Typical Installation’
below.
Alternatively, the stove can be fitted to an existing masonry chimney. The chimney should be given a visual
inspection to check that it is in good order, clear of obstructions and is of suitable size and type for the stove.
It may be necessary to sweep the chimney
.
This should be done prior to fitting the stove or lining the
chimney. We also recommend a smoke test to check for gas tightness and chimney draft. We recommend
lining and insulating your chimney.