manualshive.com logo in svg

Firelight Blaze, Инструкция пользователя

Поделиться
Скачать
Firelight Blaze Скачать руководство пользователя страница 4

DMX Mode Selection  

 
The FL-B Blaze fixture has internal jumpers which can be preset to operate the unit in one of four  DMX 
control modes.  Minimal control mode allows control of fixture intensity, while full control mode allows control 
over fixture intensity and effect motor speed.  Depending on the fixture model, the unit may be set to use 
from one to four DMX channels.  The default setting for all FL-B Blaze fixtures is for four channel DMX 
mode.  The first two channels control the intensity of the red and amber LED emitters, with two additional 
channels controlling the speed of the effect drive motors.       
 

 
DMX Mode Confirmation 

 

The selected DMX mode can be confirmed without opening the unit.  When power is applied to the fixture in 
DMX mode, the green “Power” indicator will light immediately, and the green “Sync” indicator will flash from 
one to four times depending upon the DMX Mode setting.  The number of flashes corresponds to the mode, 
and to the number of DMX channels required to properly control the fixture.  After displaying the DMX 
mode, the “Sync” indicator will then go out in the absence of DMX data, or will illuminate steadily if good 
DMX data is being received.  

 

 

 
DMX Mode Selection 

 
The DMX mode is selected by the position of internal jumpers J7 and J8, which are located on the DMX 
Interface board inside the fixture.  If necessary, these settings can be altered by opening the fixture to change 
the jumper settings . The fixture should be disconnected from the DC power supply before opening the unit 
housing to change any jumper setting.  The jumper positions for the various settings are illustrated below.    

 

 

 
 
 
 
 
 
 
 
 
 
 
DMX Channel Assignments 

 
The DMX channel assignments in the four available modes are defined in the following chart 
 
Mode 

Channel 1 

Channel 2 

Channel 3 

Channel 4 

One Channel 

LED Intensity* 

Unused 

Unused 

Unused 

Two Channels 

LED 1 Intensity 

LED 2 Intensity 

Unused 

Unused 

Three Channels 

LED Intensity* 

Motor 1 Speed 

Motor 2 Speed 

Unused 

Four Channels 

LED 1 Intensity 

LED 2 Intensity 

Motor 1 Speed 

Motor 2 Speed 

 
*  LED intensity in these settings will control the output of both LED driver channels, which are commonly 
driven in parallel for driving high output white LED emitters, or arrays of multiple emitters.   

Содержание Blaze













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды