manualshive.com logo in svg

Firelight Blaze, Инструкция пользователя

Поделиться
Скачать
Firelight Blaze Скачать руководство пользователя страница 1

 

 

 

FIRELIGHT BLAZE USER INSTRUCTIONS 

 

Description: 

 
The Firelight  model FL-B “Blaze” fixture is a compact, lightweight  moving pattern projector which uses 
advanced long lifetime LED light sources to produce high light output from a very small package.  The unit is 
designed to project a moving pattern of light with an irregular character resembling the appearance of fire or 
flames.  Two pattern wheels rotated by gear reduction motors produce the moving effect pattern with very 
little light loss.  The projection lens mount allows for adjustment of effect focus.  The lighting industry 
standard DMX control interface provides control of effect motor speed and output intensity.  Installation of 
glass or dichroic color filters, aperture plates, or other optics in the filter slot provided will create further 
variations in the appearance of the output pattern.   
 

 

Recommended Use 

 
The Firelight Blaze fixture is intended for use in applications where the appearance or illusion of fire or flames 
is desired.  The fixture is intended to operate from a 120 volt AC power source using the DC power supply 
provided, or an appropriate substitute.  The FL-B unit can be operated from any DC power source with 
correct voltage and polarity, and an adequate current rating.   
 

 

 

 

PRECISION PROJECTION SYSTEMS INCORPORATED 

17508 STUDEBAKER ROAD, CERRITOS, CA 90703-3638 

TELEPHONE: 562 865-8552 FACSIMILE: 562 924-7133 

WEBSITE 

www.ppsfx.com

 

EMAIL: 

[email protected]

 

Содержание Blaze













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды