Configuring Cassettes
9
Summit Series UND User’s Guide
Configuring Cassettes
Before you can load cassettes with notes into your safe for vending, you must first define the
type of currency that will go into each casette. Each cassette must be assigned a denomination
for the notes that will be loaded.
You can also update the cassette configuration if you need to change the denominations
available in the UND. Changes to cassette configuration can be made only when the cassette is
empty. If you want to change the denomination for a previously defined cassette, you must first
do one of the following:
•
Remove the existing cassette from the UND, and replace it with an empty cassette,
being sure to enter the number of notes in the cassette as 0 (zero). For instructions on
how to replace a cassette, see
Replacing a Cassette on page 19
•
Adjust the change fund amount so that the number of notes in the cassette is 0 (zero),
and then remove any remaining notes from the cassette. For instructions on how to
adjust the change fund, see
Auditing or Adjusting the Change Fund on page 25
Procedure
1
Log in to the safe that the UND is connected to. For more information, see
2
Tap
Admin
on the Main Menu. The Admin Menu appears.
3
Tap
Define Vend Notes
. The Configure Cassettes screen appears.
Содержание Summit Series
