NKL
auditlok xl
®
®
SERVICE MANUAL
2
®
inTrOdUcTiOn
abOUT nKL bsd safe
NKL has produced the “BSD” style safe for
more than two decades. In that time the
safe has undergone numerous relatively
minor changes to the physical design. The
major features have remain unchanged and
include NKL’s 5-point boltwork outer door
with a manual drop to a secure inner com-
partment. Since 2000 only the AuditLok XL
has been used on BSD safes. BSD safes
are available in several standard sizes
with a variety of interior options. Although
numerous parts exist for custom variations,
parts listed in this manual are restricted to
standard models.
aUdiTLOK XL eLecTrOnic LOcK
AuditLok XL is an electronic lock control
package used primarily although not exclu-
sively on NKL “BSD” safes. Major AuditLok
XL features include positive user identifi
-
cation, duress and burglary alarm output,
programmable delay and timelock settings,
armored car override, and a comprehensive
audit log. Electronics can provide access
control for up to four safe doors, each con-
figured uniquely. There are two generations
of AuditLok XL electronics.
“OLD” A
uDit
L
Ok
XL (P
re
-2008)
AuditLok XL electronics were first avail
-
able in the mid 1990s. Originally, AuditLok
XL allowed only Key access. In 2005 NKL
released an updated software version to
support Keyless access.
“N
ew
” A
uDit
L
Ok
XL (2008)
In early 2008 NKL released a completely
new generation of AuditLok XL electronics.
User features remain substantially similar
even though the new AuditLok XL uses
completely different circuit boards and
cables. New AuditLok XL electronics allow
either Key or Keyless access.
u
PgrADe
P
OLicy
As of this writing it is NKL policy to replace
old AuditLok XL (pre-2008) components
with the same generation parts until those
parts are no longer available. When old
AuditLok XL parts are no longer available
safes requiring repair will have to be up
-
graded to new (2008) AuditLok XL elec-
tronics. A complete upgrade kit is available
from NKL Parts Department.
repair service
repair of an nKL safe or any safe with auditLok
XL electronics should only be attempted by
factory authorized personnel. service must be
coordinated and approved by nKL prior to the
repair to be covered under warranty or service
contract. Unauthorized service will void your
warranty and/or terms of your service contract
and will definitely not be paid by nKL. Outside
the United states contact your dealer or dis-
tributor to obtain authorized service.
TechnicaL sUppOrT
NKL factory technicians are available to
provide technical assistance to authorized
field technicians. NKL technicians are avail
-
able by phone 8 am to 10 pm Eastern time
Mon-Sat and 8 am to 4 pm on Sundays.
After hours leave a voice-mail and the on
duty technician will return your call. Be
prepared to provide the work order number
when asked.
nKL TechnicaL sUppOrT
1.800.452.4655
OperaTing insTrUcTiOns
Refer to the applicable Operation Manual
or Store Manual for detailed operating in
-
structions for the generation of electronics
on your safe.
