
REV. C Page 13
Round/Square Flat Disc Fire Pits
1
26-inch Round Flat Stainless Steel Pan
1
PAN-SS26D
1
29-inch Round Flat Stainless Steel Pan
1
PAN-SS29D
1
34-inch Round Flat Stainless Steel Pan
1
PAN-SS34D
1
39-inch Round Flat Stainless Steel Pan
1
PAN-SS39D
1
44-inch Round Flat Stainless Steel Pan
1
PAN-SS44D
1A 25-inch Square Flat Stainless Steel Pan
1
PAN-SS25S
1A 30-inch Square Flat Stainless Steel Pan
1
PAN-SS30S
1A 34-inch Square Flat Stainless Steel Pan
1
PAN-SS34S
1A 40-inch Square Flat Stainless Steel Pan
1
PAN-SS40S
1A 46-inch Square Flat Stainless Steel Pan
1
PAN-SS46S
2
22-inch Spur (Used on 25, 26, 29, 30-inch pans)
1
B-SPUR22
2
31-inch Spur (used on 34-inch pans)
1
B-SPUR31
2
36-inch Spur (used on 39, 40, 44, 46-inch pans)
1
B-SPUR36
3
½” NPS Brass Mounting Nut
1
105-8
4
⅞” Flat Washer/Spacer
1
ST3-113-1026
5
½” Flex Gas Line (46-inch length)
1
T-200-9898-46
6
Natural Gas Orifice Air Shutter (25", 26", 29”, 30" NG models)
1
OAS-NG16
6a Propane Gas Orifice Air Shutter (25", 26", 29”, 30" LP models)
1
OAS-LP31
6
Orifice Air Shutter NG (34” NG models with 31" Spur)
1
OAS-NG05
6a Propane Gas Orifice Air Shutter (34” LP models)
1
OAS-LP26
6
Natural Gas Orifice Air Shutter (39", 40", 44”, 46" NG models)
1
OAS-NG25/64
6a Propane Gas Orifice Air Shutter (39", 40", 44”, 46" LP models)
1
OAS-LP12
7
Key Valve
1
BVL2S
7
Chrome Plated Key
1
KEY-PC-12
7
Chrome Cover Plate
1
CVR-BVL2CP
8
½” NPT to ½” Male Flare Fitting
1
U1-8D-S
9
½” NPT Female to Male Flare Fitting
1
U3-8D-S
10 5½” x 3” TMSI cover plate
1
PLATE-MT
11 ** LP Regulator with 32” Hose
(Not for use with any NG models)
1
FG-32LPHRK
FLAT DISC REPLACEMENT LIST
Item
Description
Qty. Part Number
FIRE PIT MAINTENANCE
1. The fire pit should be inspected and cleaned before initial use at least annually by a qualified field service person.
2. Any component that is found faulty must be replaced with an approved component.
3. Any tampering or modifying with the fire pit is dangerous and voids all warranties.
4. During winter months in cold climates and various seasons operation the fire pit may be affected by weather
conditions. It is recommended to use a lid of your fire pit to protect it from humid/rainy weather conditions when not in
use (See Media CAUTION on page 3). Heavy rains/downpours could affect the fire pit operation if not covered; if this
occurs ensure you allow the fire pit time to dry out before attempting to operate.
NOTE
: If a combustible type cover is
used over the fire pit when not in use be sure to remove it before operation to prevent a severe safety hazard.
5. Carbon (soot) may build up on the surface of logs (if installed) during heavy use. Sooting may also occur periodically
on the screen of the ignitor hood. To clean, brush off with a dry bristle brush or cloth. Keep soot away from clothing
or furniture.
6. Over time stainless steel parts can discolor when heated, usually a golden or brown hue. This discoloration is normal
and does not affect the performance of the appliance.
** This is a required accessory when converting to LP gas.