FireFlex Systems Inc. ICAF System, Руководство по эксплуатации и техническому обслуживанию

Страница: 36 / 41

Page 1 of 4
ICAF -
Integrated Compressed Air Foam System
System Characteristics Section
H
FM-0723-0-14C
Cabinet for Self-Contained Unit
(With Control Panel)
The ICAF unit cabinet is made of sturdy 14 gauge steel,
measuring 36" x 20" x 71" (91,4 x 50,8 x 180,3 cm) or 46" x
24" x 71" (116,8 x 61 x 180,3 cm) depending on the
configuration provided. Refer to Figure 1 for dimensions.
All surfaces are rust proof coated, inside and outside, with
fire red, oven baked polyester powder on phosphate base.
Cabinet is provided with individual access doors for the
hydraulic and electrical sections and the emergency release
with a neoprene gasket to avoid vibrations.
Electrical junction boxes are integrated with the cabinet for
connection of detection system, auxiliary contacts and
signaling devices. Knockouts can be drilled by the installing
contractor on-site but have to meet the restrictions indicated
on Figure 2.
Gauges to indicate air, water supply pressure and priming
water pressure are all visible through clear Lexan windows.
IMPORTANT ! ICAF units are NOT designed to be
installed where they will be subjected to outdoors and/or
freezing conditions. Refer to ENVIRONMENTAL DATA
for additional details. Subjecting the unit to conditions
outside these limitations might hamper the normal
operation of the system.
Cabinet doors are provided with hinges that can easily be
disassembled on site to remove the door assemblies for
servicing. The cabinet assembly is pre-assembled, pre-
wired, and factory tested under ISO-9001 conditions.
Note: The mechanical section of the ICAF and the
electrical section are provided in two separate enclosures,
stacked one on top of the other.