Firechief Stove Guard FSG 1, Инструкция по установке и эксплуатации, Страница: 7 / 24

INSTALLATION 7
WALL
1b
SELECT THE REQUIRED LOCATION AND MOUNT THE BRACKET
Wall mounting requires a bracket (SAI1000-FBx), sold separately. The bracket can be fastened to
the wall using adhesive tape or screws.
See the detailed mounting instructions in the bracket package. Make sure that the bracket is
positioned correctly so that the Heat Sensor faces towards the centre of the cooker.
MOUNTING THE
INSTALLATION PLATE
Carefully remove the protective film from
the installation plate. Press for at least a
minute while attaching installation plate to
allow adhesive to work.
1
Mounting height on the wall above the cooker
Max 90 cm wide cooker.
Recommended: 80 cm
Alternatively: 65–79 cm*
See mounting instructions provided separately with the bracket.
* For wall mounting with a distance less than 80 cm between the Heat Sensor and the cooker, the installation will not in all
cases meet all EN standard requirements.
3
2
80 cm
Allow the Heat Sensor to reach room temperature before use.
The power to the cooker must be switched off (at the consumer unit).
See table on page 8 for the mounting location and follow instructions 1–5.