FireAngel W2-CO-10X, Инструкция по установке и эксплуатации

Страница: 6 / 16

6
INSTALLATION
DO: Ensure this alarm is installed by a
competent person who feels able to install
it according to the instructions.
DO NOT: Tamper with the alarm, for risk of
electric shock or malfunction.
To mount on a wall or ceiling:
Please ensure that you use the screws
provided, as they were chosen specifically
for use with this product. Drill holes into
the wall. Insert the plastic wall plugs.
Using a screwdriver push out the blanking
plastics to enable you to put the screws
through to secure the bracket in place.
To place on a shelf:
The base of the alarm has been designed
to allow it to stand freely on a shelf.
IMPORTANT: When placing on a shelf,
please follow the recommendations for
positioning (See ‘Positioning’).
ACTIVATING YOUR CO ALARM
Your CO alarm has an integrated power
pack. To activate the alarm you need to
remove the disabling clip by pulling it out
of the alarm. Retain the disabling tab for
future use.
When the alarm is activated the Power
LED will begin to flash green once every
minute to indicate that the alarm is fully
operational. Test the sounder, power pack
and circuitry by pressing and holding the
centre of the Test/Silence button briefly
to confirm that the alarm is operating
correctly. The sounder will sound as soon
as the button is pressed, and the Alarm
LED will illuminate red indicating that the
sounder is working and the power pack is
providing power to the unit.