18
Change the Sensor’s sensitivity settings
Due to the differences in the kitchen environment, the sensitivity level
of the Sensor may have to be set manually.
off on
off on
If the battery disconnection piece is missing
A screwdriver can be used if the battery disconnection piece is
missing. Carefully press the button on the underside of the Sensor.
1. Remove the Sensor from the mounting plate
The Sensor emits 4 “beeps” ( ). The cooker is turned off.
2. Adjust the sensitivity
3. Confirmation of setting
After 5-15 seconds, the Sensor will confirm the sensitivity setting with the same number of “beeps”.
In case of error, start from step 2 again.
4. Activate the Sensor
Return the Sensor correctly on the mounting plate. Make sure it fits well. See page 5.
Note!
Note! If the Stove Guard is installed for the first time, installation must be completed
with a function test. See page 13. The Sensor’s sensitivity can be checked or reset to the
factory setting. See page 19.
Place the Sensor on the table (as shown in the picture).
Press and hold in until 2 “beeps” ( ) are heard.
Press with 1-second interval
according to installation
instructions on pages 7-11,
depending on the installa-
tion location.
2
1
“BEEP” .... “BEEP”
2 U S E R G U I D E
OTHER SETTINGS
