13
The installation is completed when the test has been passed.
The Sensor will then give an alarm that can save lives and property.
The operating instructions, accessories and stickers must accompany
the product.
Return the power
Connect the power.
Switch on the power from the
fuse box.
Perform function test
Wait 30 seconds. Press and hold
the Sensor cover until the Sensor
emits a “beep” ( ) and the red
LED flashes.
The Control Unit will switch off
the cooker and give an alarm sig-
nal every 5 seconds. The Sensor
will also emit a test alarm after a
few seconds.
Note!
Check that there is no
power connected to the cooker
(or that there is no voltage in the
Control Unit).
Reset the alarm
Reset the test alarm by pressing
once on the Sensor cover.
Check that the cooker can be
turned on (or that there is volt-
age in the Control Unit).
If the Sensor does not respond
or if the test alarm cannot be
reset, see page 22, points 5
and 6.
FUNCTION TEST
POWER
ON
1
2
3
Installation is now ready.
Wait 15 minutes before using the cooker.
