12
Warning
NEVER use an open flame to test your FireAngel. The built in test feature accurately tests your FireAngel's operation as
required by British Standards (BS).
Caution
Do not use aerosol smoke to test your FireAngel. Aerosol contaminants can clog your FireAngel and prevent smoke
from reaching the sensor in a fire emergency.
Alarm Silence
If your FireAngel alarms and you are not testing the unit, your FireAngel is warning you of a potentially dangerous situation that
requires your immediate attention. Only use the alarm silence function after making sure that there is no ongoing fire emergency
situation.
NOTE:
Your FireAngel is suitable for use with dimmer switches.
NOTE:
During strong thunder storms and interruptions to your mains supply your FireAngel may enter the alarm reset cycle.
Your FireAngel will
automatically return to full
sensitivity after 12-minutes.
After a short delay your
FireAngel will silence and enter
into a 12-minute reduced
sensitivity reset cycle.
During the 12-minute reduced
sensitivity re-set cycle, your
FireAngel will emit an audible
'chirp' once per minute.
Switch the light on. Switch
the light off then on again
twice in rapid succession (2
flicks).