FireAngel CO-9X, Руководство пользователя

Страница: 13 / 24

11
mode ie. the Power LED will
flash green once every minute
(It may take up to two minutes
of exposure to the smoke for
the localised level of carbon
monoxide within the sensor to
reach over 50ppm). Now move
the source of CO away from the
detector as the test is finished.
Step 5
After step 4, put out the incense
stick by placing it into a dish of
water. Ensure that all flames have
been extinguished.
NOTE: If the localised carbon monoxide
level within the sensor does not reach
50ppm during the test, the sensor test will
stop automatically after 3 minutes.
15cm
(6”)